AME 85/86 Modulating Control Actuator
Brand: DanfossThe actuators AME 85 and AME 86 are used with VFM 2 (DN 150-250), VFS 2 (DN 65-100), VF2/3 (DN 125, 150) and AFQM (DN150-250) valves.
Features- "Self stroking" function
- Load related "switch off" function that prevents overloading
- Manual operation
- Diagnostic LED
Specifications
Brand
Ambient Temperature Range
- 0° to 55° C (32° to 131° F)
Approvals & Certifications
- CE
- EMC Directive 89/336/EEC, 92/31/EEC, 93/68/EEC, EN 50081-1 & EN 50082-1
- IEC 801/2 - 5
- Low Voltage Directive (LVD) 73/23/EEC & 93/68/EEC, EN 60730/2/14
Class
- Protection Class: Class III (24 V)
Consumption
- 12.5 VA - Power Consumption (Model AME 85)
- 25 VA - Power Consumption (Model AME 86)
Electrical Connectors
- Cable Gland
- Two M16 x 1.5
Environmental Protection
- IP54
Frequency
- 50/60 Hz
Function
- Self Stroking
- Switch Off (Prevents Overloading)
Indication
- Red Diagnostic LED
Input
- Control Input: 0-20 mA, 500 ohms
- Control Input: 0-10 V, 200 ohms
- Control Input: 4-20 mA, 500 ohms
- Control Input: 2-10 V, 200 ohms
Length
- Wiring Length: > 50 metres (1.5 mm²)
- Wiring Length: 0 to 50 metres (0.75 mm²)
Mounting Position
- Horizontal
- Upright
Operation
- Manual Operation
Output
- 0-10 V
- 2-10 V
Override
- Manual Override
Power Supply
- 24 Vac, 10 to -15 %
Process Temperature
- Maximum
Speed
- 3 sec/mm - Model AME 86
- 8 sec/mm - Model AME 85
Storage Temperature
- -40° to 70° C (-40° to 158° F)
Switch Type
- DIP Switches