1830A RF Thermistor Power Meter

Brand: Tegam

Thermistor RF power sensors are universally recognized as the most accurate means to measure and transfer RF power. 

The TEGAM Model 1830A was designed to operate with all types of thermistor RF power sensors while further reducing uncertainties. 

It combines a modern DC substitution bridge with a precision measurement system to provide consistent, calibrated RF power readings manually or automatically.
Features
  • Replaces the HP432 RF Power Meter
  • Compatible with Thermistor Power Sensors From: Agilent (HP), TEGAM, Weinschel, Hughes, General Microwave, Millitech
  • Supports 100 Ohms and 200 Ohms Thermistors
  • Integrates Bridge Balancer and Power Meter into One Package
  • Four Digit Calibration Factor Resolution
  • Full Remote Programmability
  • Heater Control for Ovenized Sensors
  • LXI Compliant
  • Made in USA

Specifications

Brand

Accuracy

  • ± 0.05 % of Reading - Meter Uncertainty
  • ± 0.5 µW (0.1 % at 1 mW) - Meter Uncertainty

Communication

  • 10/100 Base T Ethernet LXI-C Compliant
  • USB

Configuration

  • Software Support - SureCal, IVI-Compliant LabView Driver

Frequency

  • 100 kHz to 40 GHz (Sensor Dependent)
  • Calibrates 50 MHz Reference Outputs

Humidity

  • 0 to 95 % Relative Humidity, Non-Condensing

Mounting

  • Rack-Mounted

Operating Temperature

  • 0° to 55° C (32° to 131° F)

Power

  • -30 to 14 dBm (0.001 to 30 mW)

Power Requirement

  • 100-240 Vac, 20 VA, Max.
  • 8 Vdc at 200 mA - Heater Circuit

Resistance

  • Variable from 50 to 300 ohms - Bridge Resistance

Resolution

  • 4-Digits - Calibration Factor Resolution

Sensor, Probe Connection

  • 14-Pin Quick Connect
  • 4-Pin Mini Microphone - Heater

Sensor, Probe Type

  • Thermistor - 100 & 200 ohms, RF Power Sensors

Storage Temperature

  • -40° to 75° C (-40° to 167° F)

show more