Images are representations only.
1830A RF Thermistor Power Meter
Brand: TegamThermistor RF power sensors are universally recognized as the most accurate means to measure and transfer RF power.
The TEGAM Model 1830A was designed to operate with all types of thermistor RF power sensors while further reducing uncertainties.
It combines a modern DC substitution bridge with a precision measurement system to provide consistent, calibrated RF power readings manually or automatically.
Features- Replaces the HP432 RF Power Meter
- Compatible with Thermistor Power Sensors From: Agilent (HP), TEGAM, Weinschel, Hughes, General Microwave, Millitech
- Supports 100 Ohms and 200 Ohms Thermistors
- Integrates Bridge Balancer and Power Meter into One Package
- Four Digit Calibration Factor Resolution
- Full Remote Programmability
- Heater Control for Ovenized Sensors
- LXI Compliant
- Made in USA
Specifications
Brand
Accuracy
- ± 0.05 % of Reading - Meter Uncertainty
- ± 0.5 µW (0.1 % at 1 mW) - Meter Uncertainty
Communication
- 10/100 Base T Ethernet LXI-C Compliant
- USB
Configuration
- Software Support - SureCal, IVI-Compliant LabView Driver
Frequency
- 100 kHz to 40 GHz (Sensor Dependent)
- Calibrates 50 MHz Reference Outputs
Humidity
- 0 to 95 % Relative Humidity, Non-Condensing
Mounting
- Rack-Mounted
Operating Temperature
- 0° to 55° C (32° to 131° F)
Power
- -30 to 14 dBm (0.001 to 30 mW)
Power Requirement
- 100-240 Vac, 20 VA, Max.
- 8 Vdc at 200 mA - Heater Circuit
Resistance
- Variable from 50 to 300 ohms - Bridge Resistance
Resolution
- 4-Digits - Calibration Factor Resolution
Sensor, Probe Connection
- 14-Pin Quick Connect
- 4-Pin Mini Microphone - Heater
Sensor, Probe Type
- Thermistor - 100 & 200 ohms, RF Power Sensors
Storage Temperature
- -40° to 75° C (-40° to 167° F)
