ITC / ITL / ITD Immersion Thermostat

The ITC 100 immersion thermostat has a 100 mm insertion length. This thermostat, which is supplied with a 1/2" BSP/100 mm pocket, is suitable for the control of any application which requires accurate immersion sensing, for example in unvented hot water systems.

It which has an adjustment range of 0° to 90° C and has SPDT contacts making it suitable for the control of all types of motorised valves.

The ITL 100 immersion limit thermostat has an insertion length of 100 mm. This thermostat, which is supplied with a 1/2" BSP/100 mm pocket is suitable for any application which demands an immersion thermostat off ering manual re-set facility. The thermostat is factory pre-set to 90° C and has SPDT contacts.

The ITD 100 Immersion Dual Control & Limit Thermostat incorporates a separate limit and control function.

The control function set point can be varied between 0° to 90° C. The limit function, which requires manual resetting after activation, is factory pre-set to 100° C. This thermostat is supplied with a 1/2" BSP/100 mm pocket.