Images are representations only.
2340 Precision Power Amplifier
Brand: TegamThe Models 2340/2350 are designed for applications that require high voltage amplification beyond the standard voltage limitations of most waveform, function, or pulse generators.
With a maximum output voltage of 400 V p-p, the Models 2340/2350 come standard with a fixed gain of +50.
Gains from 10 to 100 are available by special order. Each channel is rated for 40 mA continuous current with 0.2 Ohms output impedance.
Each channel has an independent, buffered, voltage monitor output for applications that require a low-level representation of the output signal.
The buffers produce a reduction of 200:1 for 50 Ohms inputs and 100:1 for 1 MegaOhms and above inputs.
The Models 2340/2350 are cost effective solutions for specialized applications where low distortion and precise signal amplification is required.
These units are particularly suited for high frequency, electrostatic applications that require high voltage.
Features- Precise Signal Amplification with Low Distortion
- High Voltage Output up to 400 Vp-p (±200 V)
- DC-2 MHz Small Signal Bandwidth (-3 dB)
- Full Power Bandwidth, from DC to 200 kHz (-0.1 dB)
- Single or Dual Channel
- Independent 200:1 Voltage Monitor Outputs for each Channel
- Compatible with all TEGAM Arbitrary Waveform and Function Generators
- Compatible with any Signal Generator that can drive a 50 Ohms Impedance
- Excellent Choice for MEMS, Electrostatic, or Piezoelectric Applications
Specifications
Brand
Ambient Temperature Range
- 0° to 45° C (32° to 113° F)
Applications
- High Frequency Applications
Approvals & Certifications
- CE
- IEC 61010-1
Bandwidth
- DC to 2 MHz Typical (-3 dB) - Small Signal Bandwidth
- DC to 200 kHz (-0.1 dB) - Full Power Bandwidth
Channels
- 1
Electrical Connectors
- BNC Connector
Humidity
- < 80 % Relative Humidity, Non-Condensing
Operating Temperature
- 0° to 45° C (32° to 113° F)
Output
- 0 to ± 200 V Direct Coupled (400 V Peak-to-Peak)
- 40 mA Per Channel, Max.
Power Requirement
- 100 VA
- 80 W
Resistance
- 1 Megaohms Input Z (100:1 Ratio) - Voltage Monitor Output
- 50 ohms Input Z (200: 1 Ratio) - Voltage Monitor Output
Response Time
- < 0.8 µs for 200 V Step at 10 to 90 % Square Wave
Storage Temperature
- -20° to 50° C (-4° to 122° F)
Supply Voltage
- 110/200 V 50/60 Hz - Rear Panel Selectable
