Images are representations only.
DWYER Vibrating Rod Level Switch.
Price
$1,401.00 CAD
Stock
100+ In Stock
The Model VRLS Vibrating Rod Level Switch is an economical choice in level detection of powders and bulk solids.
The VRLS utilizes a piezoelectric crystal that vibrates the rod at a natural frequency. Once the rod comes in contact with the material, the vibration will be dampened and the switch will change state. Once the rod is uncovered by the material, the switch will revert to its normal state.
Perfect for silo or hopper applications, its probe design allows for self-cleaning, ensuring no build-up or bridging of material and accurate detection.
Sensitivity is adjustable for detection ranging from large granular material to small powders with low bulk densities.
The failsafe mode can be set for failure on high level or failure on low level using a selector switch in the enclosure.
Features- Probe design allows for self-cleaning, ensuring no build-up or bridging of material and accurate detection
- No mechanical moving parts with no routine maintenance required
- Sensitivity is adjustable for detection ranging from large granular material to small powders with low bulk densities
- The failsafe mode can be set for failure on high level or failure on low level using a selector switch in the enclosure
- Unaffected by the dielectric constant of the sensed material, making it superior to a capacitance level switch for applications where the dielectric constant is too low, where there is more than one material being used in one vessel, and when material moisture content can change
- Ideal for applications where the bulk density is too low for a rotating paddle level switch
Specifications
Ambient Temperature Range
- -40° to 60° C (-40° to 140° F)
Conduit Connection
- 1/2” NPT Female x 2
Consumption
- 15 VA
Electrical Connectors
- Screw Terminal
Electrical Rating
- 5 A at 250 Vac
Enclosure, Body Material
- Aluminum Painted
Environmental Protection
- IP65
Indication
- Green LED: Internal
- Red LED: Internal
Media
- Dry Powder or Bulk Materials Compatible with Wetted Materials
NPT Connection
- 1” NPT Male
Power Requirement
- 20-250 Vac/Vdc
- 50/60 Hz
Process Temperature
- -40° to 80° C (-40° to 176° F)
Response Time
- 0 to 6 seconds (Sensing Delay)
Sensitivity
- 20 lbs/ft³ (320 kg/m³) - Min. Bulk Density
Supply Pressure
- psi: 150 (kPa: 1,034, bar: 10)
Switch Type
- SPDT
Wetted Materials
- 304 Stainless Steel
- Pulp & Paper Processing
- Mining
- Food & Beverage
- Silos
- Hoppers
